Avenger EZ - Ultrasonic Flaw Detector

A revolutionary new concept in Ultrasonic Flaw Detectors.

The Avenger EZ is a small, lightweight but robust handheld ultrasonic flaw detection unit with a large clear LCD Display.

SplitView:
SplitView is Dual Timebase feature allowing the user to view the full range of the area under inspection in one window while at the same time presenting the user with a resizable second window. The second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time or set to automatically track (AutoTrack) an echo over a predefined level. SplitView also provides the ability to resize the top to bottom window proportion. For instance, the top window can be set to 10% of the available active display while the lower window would be 90%. SplitView can be turned off to use the entire screen for a single large waveform display.

SplitScan:
SplitScan is a operating mode allowing the user to view the active waveform while performing a Real Time B-Scan, whether timed or encoded. The feature gives the user positive feedback and identification of indications such as corrosion and pitting in real time.

AutoTrack:
AutoTrack is a feature where the second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time relative to the main upper window or set to Automatically Track (AutoTrack) an echo over a predefined level. While in AutoTrack, the echo being tracked will display in the center of the lower window regardless of the actual place it is in time. This features allows the user to easily view where on the echo waveform the gauge is monitoring in a zoomed fashion .

ALL NEW Productivity Features
SplitView:   Dual Timebase A-Trace
SplitScan:   A-Trace & B-Scan
AutoTrack:  Tracking Zoom Window

Other Features Include:
User Friendly, Cursor Driven, Plain Text Menus
Thickness & Amplitude Gating
EASY Grip Aluminum Sealed Case
7"H x 3.25"W x 1.4"D
Encoded & Scrolling AmpScan & B-Scan
Embedded Probe Library
2 MByte Data Logger
Scrollable "SpreadSheet" View
High Speed Scan Mode
Single Point Calibration
2 Point Calibration
300Hz Rep Rate!!
High Speed LCD Display
3 or 6 'AA' Batteries
RS-232 I/O
Optional USB
English / Metric
Backlight

SplitView Full Wave Filled

SplitView Full Wave Hollow

SplitView RF

RF - Full Active Area

SplitView RF Large Main Window

SplitView RF Small Main Window

SplitScan RF & B-Scan

Leather Case Available

Display:
240 x 320 Graphic (2.3"W x 3.1"H)
Backlight - On / Off / Auto with reading Last reading hold

SplitView: (Handheld Industry First)
Main Trace Window: 100 - 10% in 10% Incr.
Split View Window: 10% - 100% in 10% Incr.
as a Function of Main Trace Window Size

SplitScan: (Handheld Industry First)
Display A-Trace and B-Scan Simultaneously

AutoTrack: (Handheld Industry First)
When in SplitView, Second Window Displays
a Zoom View of the Main A-Trace which Tracks
The Echo Being Measured

Screen Freeze Mode

Physical:
3.25" Wide X 1.4 Deep X 7" Long
83 x 36 x 178mm
All Aluminium with Sealed and Rubberized end caps

Range:
0.4" - 340" Delay: 0-165" @ Full Range!
Resolution - 0.0001"     •Inch/mm selectable
                       0.001mm
Velocity Range:
0.0490 to .9999 in/us • fully adjustable.
1.245 to 9,999m/sec
Calibration: Range, Delay, Velocity & Zero

Pulser / Receiver: Up to 300Hz Rep Rate,
Unique and Adjustable IP Supression Mode

Display Mode: RF, +HW, -HW, FW

GAIN: 100dB

Probe Select: Single / Dual Element
Probe Library Selection

Damping: - 8 Damping Levels 22 - 2K Ohms

Alarm: LED Thickness High, Lo or High/Lo

I/O: RS-232 I/O: Download data from logger
Optional USB Connectivity

Memory: 2 MegaBYTE data logger. 30+ character alpha numeric identification of files. Store 20,000+ Data Points with Waveforms
& B-Scans

Operational Modes:
Single/Dual/Angle/Contact/Delay

Gates:
Contact - IP-1st, 1st-2nd Permits Through Paint Measurement
Delay/Bubbler/Immersion
IP Blocking, IF Blocking, IF-1st, 1st-2nd Echo Blk
POS or NEG Gating
DAG

B-Scan Features:
'T' Scan - Time encoded 'B' Scan (Scrolling)
Encoded B-Scan (optional)

Power Requirements: Operates on 3 or 6 'AA' Alkaline or NiMH Batteries • Charger & Batteries Included

Transducers, cables and accessories are
available for almost any application

Plastic carry case included

CE Approved

Manufactured in facilities meeting ISO9001 manufacturing processes

Rugged, I don't want a plastic gauge that looks like it will break if you drop it.
You got it! Billet aluminium design light weight and drop resistant with Rubberized caps to protect the "Avenger" from the elements.

Light weight
You got it! Ready to go with batteries weighing less than two pounds, small enough to fit in your tool belt, big enough to get the job done.

Easy to use, I don't want to take a 40 hour course to use it.
You got it! Plain text menus allow for easy navigation though the intuitive menu structures. The Avenger EZ comes pre configured with default setups. Fine tune for your specific probe and wedge and you are ready to get to work.

Standard batteries, I need to be able to run to any general store to buy batteries; I don't want to have to special order them or call the factory for overpriced batteries.
You got it! The Avenger comes standard with 6 high energy "AA" NiMH batteries (that are charged in the instrument) and can use standard "AA" Alkaline batteries if you choose.

I need to see it in direct sun light
You got it! VDS (Visible in Direct Sunlight) standard!

ADVANCED NDT LIMITED,
Orchard House, Orchard Close, Severn Stoke, Worcester, UK    WR8 9JJ
Telephone: 44 (0) 1905 371460         ***  Fax:   44 (0) 1905 371477
E-Mail:  sales@advanced-ndt.co.uk ***  Website:   www.advanced-ndt.co.uk