UV Lights & Torches
The Labino Ultraviolet UV Lights give exceptional UV light output without generating a great deal of heat. This allows the cases to be totally sealed to IP65 so they may be safely splashed with water, etc.
As no cooling fans are needed, the lights are lighter, quieter and need less maintainance.
The lights are available in a variety of case styles.
Battery or Mains Operation (115v / 230v) and with a choice of Floodlight, Midlight or Spotlight Beam Profiles (see below).
Benefits of Labino MPXL UV-lamps
Unbeatable UV-irradiance/feed Watt, up to 70.000 microwatts/cm2 at 15” and full UV-A emission (315-400nm). This creates new possibilities, i.e. inspections in normally lit areas even outdoors in daylight with maintained contrast-to-background and maximized probability of detection. Quality/safety is improved, time of inspection is reduced.
35W output power - low heat generation and energy consumption. No need for cooling fans. Creates a pleasant work environment, reduces energy costs.
Immediate start/restart - full power in appr. 15 seconds. Competing lamps need up to 15 minutes to warm up.
Saves time!
Unaffected by magnetic fields - Highly suitable for MPI. Competing lamps flutter and/or go out close to a magnetic field.
Saves time!
IP 65 classified - Dust tight, withstands temporary water spray.
Can be used in rough conditions, even outdoors. UV-filter will not crack if exposed to fluids.
CE-marked - According to Electromagnetic Compatibility and the Low Voltage Directive. Safe products!
ETL/cETL approved - by Edison Testing Laboratories according to UL and CSA standards. Safe products!
Comprehensive product range, including portable, battery operated units. Suits most needs!
The Labino Ultraviolet Light lamps are based on two key components - Labino DUV-35W Gas Discharge Bulb (MPXL-technology) and Labino Trigger Ballasts (Electronics).
Labino ultraviolet light lamps are available with a choice of reflectors: Spotlight , Midlight , or Floodlight .
Labino UV Light MPXL Models
Labino UV Light - Compact - Mains
Available as Floodlight, Midlight or Spotlight
Type: 135
Mains Powered designed to be mounted on a bracket
Labino UV Light - Compact - Mains
Available as Floodlight, Midlight or Spotlight
Type: H135
Mains Powered with a top mounted handle
Labino UV Light - Compact - Mains
Available as Floodlight, Midlight or Spotlight
Type: PH135
Mains Powered with a Pistol Style Handle
Labino UV Light - Duo - Mains
Available as Floodlight, Midlight or Spotlight
Type: PS135
Mains Powered with a Pistol Handle, Seperate base unit and lamp
Labino UV Light - Duo - Mains
Available as Floodlight, Midlight or Spotlight
Type: S135
Mains Powered designed to be mounted on a bracket, Seperate base unit and lamp
Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Light (TL)
Battery Powered with a compact style case and choice of top mounted or pistol style handle
Labino UV Light - Portable
Available as Floodlight, Midlight or Spotlight
Type: TrAc Light Pro (TLP)
Battery & Mains Powered with a seperate base unit and lamp
UV LED Lights & Torches
The Labino Friction Arm
A high quality, flexible and easy-to-use support system.
The system is suitable for many different applications, including Non Destructive Testing & UV-Curing, enabling the operator to work with two free hands.
Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc via the second clamp.
Length: 53 cm (21”). Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete.
Advanced NDT Limited are pleased to introduce the latest addition to our UV protection range the new UV Face Shield from Labino.
2,784 possible adjustments makes it unique. Through it's many adjustable features, the bionic face shield gives the most comfortable fit in the industry.
The Shield has got an extended top of head, chin protection and a large superior quality visor for maximum visiblity.
The visors are easily replaced and available in different materials, tints and finishes to better suit individual needs.
99.9% UV Filtration up to 385nm
The New Labino UV Blocking Face Shield
UV Light Additions & Accesories
The Labino Cable Winder
The Cable Winder is manufactured specifically for customers with unique needs - ie, mounting on the ceiling or on the wall. This picture shows lamp model PS135, 12 VDC. The cables that normally extend between the lamp unit and the electronic ballast are enclosed in the Cable Winder. Current is fed via the Power Supply unit (PSU).
The PSU also serves as a protective transformer which means that the complete circuit (after the PSU) is floating. The Cable Winder includes a cable length of 7 meters fully extended. Rewind the cable back to the start position by a gentle tug on the cable. Total weight: 8.4 kg.
The Labino White lamps have a unique white luminance, which makes it possible to see things that have not been possible before.
The Labino White Lights are available in three important distinctions - floodlight, midlight or spotlight, each giving different beams and intensities. The spotlight has the greatest focus and is the most intense, and the floodlight has the widest beam but a lower intensity. The midlight is in between.
The Labino White Light Lamps obtains full power in 5-15 seconds and can be switched on and off whenever used, without pre-cooling. You can use the lamp outdoors, even in the rain, as the lamp is IP65 certified.
Mains Powered Labino White Lights
Portable Labino White Lights
Labino Torch Light W - White Light
Available in a variety of case styles to suit your needs.
Floodlight
Distribution angle: approx. 45 degrees
Luminous flux: 3 500 lm
Midlight
Distribution angle: approx 20 degrees
Luminous flux: 3 500 lm
Spotlight
Distribution angle: approx. 3.5 degrees
Luminous flux: 3 500 lm
Intensity approx. 250 000 cd at 2500 mm
10 000 Lux at 1 meter - 211 gram
The Labino Torch Light W is a small-sized, lightweight, white light flashlight.
This Torch Light is perfect for general industrial use and as a search light in crime scene investigation.
The Labino Torch Light W contains one (1) light emitting diode (LED). The LED creates more than 10 000 Lux (930 Foot Candle) at a distance of 1 meter (39.37 inches).
The lamp measures 15.9 cm long (6.3 inches) and weighs 211 gram (7.4 oz), battery included.
Full power is reached instantly. The on/off button is positioned in the back of the lamp to prevent accidental activation.
At full charge the battery provides up to 4 hours of use. Recharge from a normal outlet or vehicle with included chargers.
The VISION 365 UV LED Blacklight Torch
A Pocket Sized UV LED Torch ideal for quick inspections and hard to reach areas.
6000µw/cm² at 400mm with a narrow beam.
The Labino UVG2 UV LED Torch Light
A Pocket Sized UV LED Torch ideal for quick inspections and hard to reach areas.
Now available in three beam profiles - Spot, Mid or Flood.
Ranging from 2000 µw/cm² at 380mm with the wider flood beam through to 12 000 µw/cm² at 380mm with the narrow Spot beam.
The Labino UVG3 UV LED Torch Light
A Pocket Sized UV LED Torch ideal for quick inspections and hard to reach areas.
12 000 µw/cm² at 380mm with a narrow Spot beam profile. The UVG3 has an additional UV Filter making this torch ideal for applications where visible light is critical.
The BigBeam UV LED Light
A Hand-Held UV LED Lamp. Available in either -Mains Operated only or the Duo (Battery & Mains operated unit).
Virtually No White Light ideal for applications where visible light is critical.
Floodlight Version = 3500µw/cm² at 380mm with a uniform wider beam area.
Midlight Version = 6000µw/cm² at 380mm with a uniform beam area.
The Labino TrAc Finder Crime Kit
Very High Performance ALS (Alternative Light Source / Alternate Light Source) - For Forensic & Crime applications.
The Labino Astra Torch Light Crime Kit
High Performance ALS (Alternative Light Source / Alternate Light Source) LED Torch / Flashlight - For Forensic & Crime applications.
Forensic & Crime Scene Lights ALS - Alternative Light Sources
Labino UV & Visible Light Meters for accurate measurement of UV-A radiation and White Light emmisions.
ADVANCED NDT LIMITED,
Orchard House, Orchard Close, Severn Stoke, Worcester, UK WR8 9JJ
Telephone: 44 (0) 1905 371460 *** Fax: 44 (0) 1905 371477
E-Mail: sales@advanced-ndt.co.uk *** Website: www.advanced-ndt.co.uk
The Labino Nova Torch Light Crime Kit
High Performance ALS (Alternative Light Source / Alternate Light Source) LED Torches / Flashlights - For Forensic & Crime applications.
A wide range of spare parts and accessories are also available for our UV Lights & UV LED Torches.
Please click this link for more information and part Numbers.
The LabinOil
Complete Engine Leak Detection test kit with fluorescent dye and UV LED Torch.
The kit includes six (6) 25ml bottles of LabinOil dye and one (1) Labino UVG2-SPOT UV LED Torch as well as accessories in a hard carry case.
You do not need to clean the engine before or after the engine leakage test, nor do you have to empty the engine of oil. No Special training is required when using the LabinOil Kit.
The VISION 395 UV LED Torch
A Pocket Sized UV LED Torch.
With a wider beam of 395nm wavelength.
Only suitable for basic UV applications.
The Labino UVG4-HEAD UV LED Torch Light
A Handsfree High Performance UV LED Torch Light. Head Mounted for handsfree inspections.
Light Ouput as per the UVG2 Torches.
The Labino UVG5-HEAD UV LED Torch Light
A Handsfree High Performance UV LED Torch Light. Head Mounted for handsfree inspections.
The UVG5-HEAD has an additional White Light Filter. This provides superior contrast ideal for Non-Destructive Testing Applications. Light Output as per UVG3 Torches.
The scale consists of a series of fluorescent circles, within which are smaller white circles, within each of which is a fluorescent "X". The brightness of each succeeding white circle and fluorescent "X" diminishes until the last in the series is no longer visible. The scale is held at the test surface and the operator determines which of the X's he can see.
If the operator cannot easily see up to and including the X at 30 percent relative fluorescent brightness, the fluorescent light source should be brought closer to the work surface or the fluorescent intensity should be increased. If, when the scale is held at the test surface, the white circles appear to be as bright as the corresponding fluorescents X's, the ambient white light is excessive and the fluorescent contrast is diminished. To correct this, the ambient white light must be reduced or the fluorescent intensity increased. Also included with the Inspectability Scale, are a fluorescent inch and metric ruler and a series of measured fluorescent dots and black dots, for defect indication comparison.
