Galaxy OverHead UV LED Labino Galaxy OverHead UV LED Bench Light
Labino Galaxy OverHead UV LED Bench Light Galaxy’s modular feature allows YOU to design the area to be covered. You can now mount together as many Galaxies as you require to cover large areas. The Labino OverHead Inspection System Galaxy, based on LED technology, is more compact and weighs less than many comparable products on the market today. Each Galaxy weighs just 2.2 kilos (4.85 lbs)! Galaxy is also compact in size measuring 7.87 inches (20cm) long, 5.9 inches (15cm) wide and 1.6 inches (4.1cm) high. It is designed for use on specialised benches for conducting FPI and MPI Inspections on metallic parts of all shapes and sizes. The light weight and compact size makes it easy for the user of the bench to operate and move around the inspected area, if necessary. The distinctive feature of this system is its modular design. Users whose inspection tasks require coverage of large areas can use this modular system to design their own covered areas. A user can expand the covered area by connecting together any number of Galaxy units required, either from the long side or the short side. The Labino Galaxy is available as a MidLight and a FloodLight. Each Galaxy unit consists of 12 UV LED’s offering a very even beam with each LED having an estimated life expectancy of 30,000 hours. This bench light is also equipped with a white light LED for after inspection. At full capacity Labino Galaxy generates an intensity greater than 7,000µW/cm2 (70W/m2) for the MidLight and greater than 5,000µW/cm2 (50W/m2) for the floodlight, at 38cm (15 inches). It is filtered to emit almost no visible light. Full power is achieved instantly with the start button. The Labino Galaxy is 100% free from UV-B. It is compliant with ASTM UV-A Intensity and wavelength specifications for FPI and MPI. IP65 approved for dust and water jet. Special Features with standard control panel (F605) Dimmer - The UV Light can be dimmed down up to 20% of it’s full capacity. The operator can set the intensity to his or her choice in 5 steps as follows:- o MidLight:  7,000 < 6,000 < 4,500 < 3,000 < 1,500  µW/cm2 (W/m2) o FloodLight:  5,000 < 4,000 < 3,000 < 2,000 < 1,000  µW/cm2 (W/m2) Timer - Avoid unnecessary burning time of the LED’s through a timer. Set the duration of your working session to your choice of: 0.5 hours, 1.0 hours, 2.0 hours, 4.0 hours, 8.0 hours. Cooling System - The heat generated from the LED’s is managed via a mechanical cooling system - no fans are necessary! Remote Control - The on/off, the dimmer, the white light and the timer operate remotely within a range of six meters. Modular Design - Able to connect as units together as required to cover your area under inspection.
Labino Galaxy OverHead UV LED Bench Light.
Galaxy Overhead Brochure Galaxy Overhead Brochure UV Lights & UV LED Torch Range UV Lights & UV LED Torch Range
Home > Products > UV Lights & UV LED Torches > UV LED Lights & UV LED Torches > Labino Galaxy OverHead UV LED Light
Products and Specifications Subject to Change Without Notice.                                                                                                         E & O.E. Advanced NDT Limited Orchard House - Orchard Close Severn Stoke - Worcester WR8 9JJ - UK Tel: 44 (0) 1905 371460 - Fax: 44 (0) 1905 371477 Email: sales@advanced-ndt.co.uk - Web: www.advanced-ndt.co.uk Home Home Home Products Products Products Brochures Brochures Brochures Contact Us Contact Us Contact Us
A wide selection of customized control panels makes the galaxy compliant with all relevant ASTM and ISO Standards as well as with primes engineering specifications. The F607 has a dimming function with 250 steps for an extremely accurate measurement of the intensity. It also has a memory function that maintains the last intensity used even if the unit is turned off between sessions. The white light is operational via an ON / OFF button. The timer function is disabled. The F608 has a dimming function with 5 steps similar to the F605. It also has a memory function that maintains the last intensity used even if the unit is turned off between sessions. The white light is operational via an ON / OFF button as well as the timer. The F609 Operates the Galaxy UV Light as simply ON / OFF. It maintains an approximate intensity of 7,000µW/cm2 for the Midlight and 5,000µW/cm2 for the Floodlight. This makes the Galaxy compliant with USAF and Pratt & Whitney requirements. All other functions listed with the F605 are disabled, including the white light LED. The F610 Operated the Galaxy Midlight UV simply as ON / OFF but intensity is fixed at approximately 4,500µW/cm2. This makes the Galaxy compliant with USAF, Pratt & Whitney, Boeing and Rolls-Royce (RRES 90061) requirements. All other functions listed with the F605 are disabled, including the white light LED.
All Galaxy versions are compliant with ASTM E3022-2015. See above regarding the customized control panels for compliance with Aerospace standards and requirements.
Labino NDT Catalogue This is a link to the Labino NDT Catalogue. The catalogue contains information and technical specifications on the Labino range of UV lights, UV torches and other UV related products. The Labino NDT catalogue also includes: Beam diameter graphs (highlighting the varying beam profiles of different LED models) Summary of features table for the LED Models LED Compliance table (highlighting the compliance to varying standards)
Galaxy OverHead UV LED Labino Galaxy OverHead UV LED Bench Light
Labino Galaxy OverHead UV LED Bench Light.
Products Products Home Home Contact Contact UV Lights & UV LED Torches Range Brochures Brochures Galaxy OverHead
Labino Galaxy OverHead UV LED Bench Light Galaxy’s modular feature allows YOU to design the area to be covered. You can now mount together as many Galaxies as you require to cover large areas. The Labino OverHead Inspection System Galaxy, based on LED technology, is more compact and weighs less than many comparable products on the market today. Each Galaxy weighs just 2.2 kilos (4.85 lbs)! Galaxy is also compact in size measuring 7.87 inches (20cm) long, 5.9 inches (15cm) wide and 1.6 inches (4.1cm) high. It is designed for use on specialised benches for conducting FPI and MPI Inspections on metallic parts of all shapes and sizes. The light weight and compact size makes it easy for the user of the bench to operate and move around the inspected area, if necessary. The distinctive feature of this system is its modular design. Users whose inspection tasks require coverage of large areas can use this modular system to design their own covered areas. A user can expand the covered area by connecting together any number of Galaxy units required, either from the long side or the short side. The Labino Galaxy is available as a MidLight and a FloodLight. Each Galaxy unit consists of 12 UV LED’s offering a very even beam with each LED having an estimated life expectancy of 30,000 hours. This bench light is also equipped with a white light LED for after inspection. At full capacity Labino Galaxy generates an intensity greater than 7,000µW/cm2 (70W/m2) for the MidLight and greater than 5,000µW/cm2  (50W/m2) for the floodlight, at 38cm (15 inches). It is filtered to emit almost no visible light. Full power is achieved instantly with the start button. The Labino Galaxy is 100% free from UV-B. It is compliant with ASTM UV-A Intensity and wavelength specifications for FPI and MPI. IP65 approved for dust and water jet. Special Features with standard control panel (F605) Dimmer - The UV Light can be dimmed down up to 20% of it’s full capacity. The operator can set the intensity to his or her choice in 5 steps as follows:- o MidLight:  7,000 < 6,000 < 4,500 < 3,000 < 1,500  µW/cm2  (W/m2) o FloodLight:  5,000 < 4,000 < 3,000 < 2,000 < 1,000  µW/cm2  (W/m2) Timer - Avoid unnecessary burning time of the LED’s through a timer. Set the duration of your working session to your choice of: 0.5 hours, 1.0 hours, 2.0 hours, 4.0 hours, 8.0 hours. Cooling System - The heat generated from the LED’s is managed via a mechanical cooling system - no fans are necessary! Remote Control - The on/off, the dimmer, the white light and the timer operate remotely within a range of six meters. Modular Design - Able to connect as units together as required to cover your area under inspection.
A wide selection of customized control panels makes the galaxy compliant with all relevant ASTM and ISO Standards as well as with primes engineering specifications. The F607 has a dimming function with 250 steps for an extremely accurate measurement of the intensity. It also has a memory function that maintains the last intensity used even if the unit is turned off between sessions. The white light is operational via an ON / OFF button. The timer function is disabled. The F608 has a dimming function with 5 steps similar to the F605. It also has a memory function that maintains the last intensity used even if the unit is turned off between sessions. The white light is operational via an ON / OFF button as well as the timer. The F609 Operates the Galaxy UV Light as simply ON / OFF. It maintains an approximate intensity of 7,000µW/cm2 for the Midlight and 5,000µW/cm2 for the Floodlight. This makes the Galaxy compliant with USAF and Pratt & Whitney requirements. All other functions listed with the F605 are disabled, including the white light LED. The F610 Operated the Galaxy Midlight UV simply as ON / OFF but intensity is fixed at approximately 4,500µW/cm2. This makes the Galaxy compliant with USAF, Pratt & Whitney, Boeing and Rolls-Royce (RRES 90061) requirements. All other functions listed with the F605 are disabled, including the white light LED.
All galaxy versions are compliant with ASTM E3022-2015. See above regarding the customized control panels for compliance with Aerospace standards and requirements.