PRODUCTS PRODUCTS
Products and Specifications Subject to Change Without Notice.                                                                                                         E & O.E.
Advanced NDT Limited Orchard House - Orchard Close Severn Stoke - Worcester WR8 9JJ - UK Tel: 44 (0) 1905 371460 - Fax: 44 (0) 1905 371477 Email: sales@advanced-ndt.co.uk - Web: www.advanced-ndt.co.uk
PosiPen Defelsko PosiPen - Pull off Coating Thickness Gauge
Defelsko PosiPen - Pen style Pull off Coating Thickness Gauge
PosiPen Measures non-magnetic coatings such as paint, enamel, plating, & hot- dip galvanising on steel. PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Coating Thickness Gauges are not able to reach. PosiPen measures: on hot surfaces on small surfaces in different positions PosiPen has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys. PosiPen is manufactured in three versions: PosiPen Model A for measurements on surfaces with normal temperatures PosiPen Model B for measurements on surfaces with extreme temperatures (between -100°C and +230°C)
PosiPen A and B have two scales, microns (metric) and mils (inch)
Range: 0.25 to 20 mils (inch) Tolerance ±10% and 0.1 mil Range: 5 to 500 microns (metric) Tolerance ±10% and 2.5 microns PosiPen A and B are calibrated to NIST calibration standards.
PosiPen Model C ferrite comparator PosiPen Ferrite Comparator Some objects become excessively magnetic. For example 300 series stainless steel is non-magnetic but becomes magnetic over time. Certain welding seams become magnetic compared to the surrounding metal. PosiPen C allows you to compare ferrite content to a known value. PosiPen C has two scales:
Ferrite content measuring range: 0-10 linear units to compare Ferrite content to an known value
Coating thickness measuring range: 0.25 to 20 mils (inch scale) Tolerance: +10% and +0.1 mil
PosiPen Brochure PosiPen Brochure Coating Thickness Gauge Range Coating Thickness Gauge Range
Home > Products > Coating Thickness Gauges > Defelsko PosiPen
PosiPen Defelsko PosiPen - Pull off Coating Thickness Gauge
Defelsko PosiPen - Pen style Pull off Coating Thickness Gauge
PosiPen Measures non-magnetic coatings such as paint, enamel, plating, & hot-dip galvanising on steel. PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Coating Thickness Gauges are not able to reach. PosiPen measures: on hot surfaces on small surfaces in different positions PosiPen has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys. PosiPen is manufactured in three versions: PosiPen Model A for measurements on surfaces with normal temperatures PosiPen Model B for measurements on surfaces with extreme temperatures (between -100°C and +230°C) PosiPen Model C ferrite comparator
PosiPen A and B have two scales, microns (metric) and mils (inch)
Range: 0.25 to 20 mils (inch) Tolerance ±10% and 0.1 mil Range: 5 to 500 microns (metric) Tolerance ±10% and 2.5 microns PosiPen A and B are calibrated to NIST calibration standards.
PosiPen Ferrite Comparator Some objects become excessively magnetic. For example 300 series stainless steel is non-magnetic but becomes magnetic over time. Certain welding seams become magnetic compared to the surrounding metal. PosiPen C allows you to compare ferrite content to a known value. PosiPen C has two scales:
Ferrite content measuring range: 0-10 linear units to compare Ferrite content to an known value
Coating thickness measuring range: 0.25 to 20 mils (inch scale) Tolerance: +10% and +0.1 mil
Products Products Home Home Contact Contact Coating Thickness Gauges Brochures Brochures PosiPen