Products & specifications subject to change without notice.                            E. & O.E.
Advanced NDT Limited Unit 4, Elgar Business Centre Moseley Road Hallow, Worcester WR2 6NJ, UK TEL: 44 (0) 1905 371 460
UV Spares & Accessories
A selection of Spares, Add-ons & Accessories for our range of UV Lights & Torches.
UV Lights Page Button
UV Lamp / UV Bulb Part Number: F101 (DUV-35W) The Labino DUV-35W is an exceptional gas discharge UV Bulb / lamp manufactured in cooperation with Phillips. Our high pressure arc bulb is characterized by superior output performance, intense UV Light with a peak at 365nm, and a service life of over 2000 hours. The Labino DUV-35W is suitable for use in all Labino MPXL 35W UV lights. Use the Labino DUV-35W bulb / lamp only with Labino electronic trigger ballast. Automotive ballast cannot be used.
Trigger Ballast Boards (MPXL)
Trigger Ballast - Electronics used in all MPXL Lamps (100-230VAC) Part Number: F97 (100VAC) Part Number: F98 (115VAC) Part Number: F99 (230VAC) Trigger Ballast - Electronics used in all MPXL Lamps (12/24VDC) Part Number: F100 (12/24VDC) Note: Trigger Ballast Boards must be fitted by a suitably qualified electrician. Trigger Ballast Boards carry a 12 month warranty only if installed by Labino approved suppliers
Labino Trigger Ballast Boards (MPXL)
Reflectors (MPXL)
Reflectors For use in the Labino MPXL range of UV Lights. Part Number: F401 (FLOOD) 45o angle Part Number: F351 (MID) 20o angle Part Number: F301 (SPOT) 3o angle
Labino UV Reflectors Flood, Mid & Spot
Filter Glass (MPXL)
Replacement Filter Glass (Front Glass) The Front filter glass can be replaced if damaged. For use with all Labino MPXL UV Lights. Part Number: F70
Labino UV Filter Glass
Mounting Brackets & Stands
Mounting Brackets For use with all Labino MPXL UV Lights and BB Series. Part Number: F800 (U-Shaped Mounting Yoke) Part Number: F801 (Mounting Brackets - set of two) Part Number: F802 (Mounting Bracket with loop - set of two) Stands For use with Labino MPXL, BB and MB Series Part Number: A530 (Labino Friction Arm) - A high quality, flexible and easy-to-use support system, enabling the operator to work with two free hands. Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc. via the second clamp. Length: 53 cm (21”). Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete. Part Number: A532 (UVG Variable Gooseneck Arm) - The UVG arm has a clamp at the lower part that mounts on a bench or a hard surface and a clamp at the top especially designed to fit the UVG series Torches. The snake shape body allows the user to form any angle required to keep the torch facing a specific position. Part Number: A533 (MB Variable Gooseneck Arm) - The MB arm has a clamp at the lower part that mounts on a bench or hard surface and a screw at the top specifically designed to fit the MB series lights. The heavy-duty snake shape body allows the user to form any angle required to keep the MB facing a specific position.
Mounting Brackets & Stands for UV Lights
Mains Chargers & PSU’s (MPXL)
Mains Chargers For use with the TrAc Series of UV Lights. Part Number: B132 (TrAc Pack Standard ) Part Number: B161 (TrAc Light) Part Number: B136 (TrAc Light Pro) Power Supply Units (PSU’s) For use with the TrAc Pack Pro UV Lights. Part Number: B120 (230v PSU Unit - TrAc Pack Pro) Part Number: B122 (115v PSU Unit - TrAc Pack Pro)
Mains Chargers & PSU's for Labino MPXL UV Lights
Batteries (MPXL)
Replacement Batteries For use with the TrAc Series of portable MPXL UV Lights. Part Number: B111 (TrAc Pack Standard & TrAc Pack Pro) Part Number: B112 (TrAc Light) Part Number: B113 (TrAc Light Pro)
Replacement Batteries
Handles, Straps & Misc. Spares
Miscellaneous spares For use with the Labino MPXL UV Lights. Part Number: F141 (Pistol Handle) Part Number: F142 (Top Handle) Part Number: F62 (Cable Bend Protection) Part Number: S201 (On/Off switch) Part Number: F60 (O-ring front) Part Number: F143 (Shoulder Strap to suit TrAc Pack Standard & TrAc Pack Pro) Part Number: F145 (Shoulder Strap to suit TrAc Light Pro) Part Number: F61 (Heat Protection pin - one supplied)
Spare Handles & Straps for Labino UV Lights
En-Liten White Light Add-on
En-Liten LED White Light Add-on For use with all Labino Standard MPXL UV Lights. Also suitable for use with Labino BB Series LED UV Lights. Part Number: L2001 (En-Liten LED White Light attachment)
En-Liten White Light Add-On
UVG LED Torch Spares
UVG2 & UVG3 Spares For use with all Labino UVG UV LED Torches. Part Number: B201 (UK Battery Charger) Part Number: B115 (Battery) Part Number: B160 (Car Charger) Part Number: A532 (UVG Variable Gooseneck Arm) Part Number: F107 (UVG Rubber Bumper) Part Number: C3100 (Hard Carry Case) Part Number: A600 (Tripod Stand
Labino UVG UV LED Torch Spares
VISION 365 LED Torch Spares
VISION 365 Spares For use with VISION 365 (UV365) UV LED Torches. Part Number: B201 (UK Battery Charger) Part Number: B115 (Battery) Part Number: B160 (Car Charger) Part Number: C3100 (Hard Carry Case) Part Number: A600 (Tripod Stand
VISION 365 UV LED Torch Spares
UV Blocking Glasses & Face Shield For use with all UV Lights. Part Number: S505 XC (Regular fit glasses) Part Number: S400 (UV Blocking Visor Full face protection)
UV Eye Protection Labino Stands & Mounting Brackets Brochure Button
MB Series Spares
MB UV LED Light Spares For use with the MB UV LED Lights. Part Number: F111 (Rubber Bumper) Part Number: A504 (MB Belt Holster) Part Number: A533 (MB Variable Gooseneck Arm) Part Number: F105 (Thumb Screws) Part Number: A601 (Magnet for PSU Holder) Part Number: B115 (Spare Battery) Part Number: B201 (External Battery Charger Set - UK) Part Number: B321 (Internal Battery Charger Set - UK) Part Number: B325 (PSU for Mains Only Models - UK)
Labino MB Series Spares and accessories
Note: Other spares are available please contact us with your needs.
Request Quote Button Request Quote Button UV Eye Protection Brochure Button Trigger Ballast Boards (MPXL) Shop Now Button Labino UV Bulb / Lamp DUV-35W Shop Now Button Mounting Brackets & Stands Shop Now Button UV Eye Protection Shop Now Button SHOP
Products & specifications subject to change without notice.                            E. & O.E.
Advanced NDT Limited Unit 4, Elgar Business Centre Moseley Road Hallow, Worcester WR2 6NJ, UK TEL: 44 (0) 1905 371 460
A selection of Spares, Add-ons & Accessories for our range of UV Lights & Torches.
UV LIGHTS
DUV-35W UV Bulb (MPXL)
UV Lamp / UV Bulb Part Number: F101 (DUV-35W) The Labino DUV-35W is an exceptional gas discharge UV Bulb / lamp manufactured in cooperation with Phillips. Our high pressure arc bulb is characterized by superior output performance, intense UV Light with a peak at 365nm, and a service life of over 2000 hours. The Labino DUV- 35W is suitable for use in all Labino MPXL 35W UV lights. Use the Labino DUV-35W bulb / lamp only with Labino electronic trigger ballast. Automotive ballast cannot be used.
Trigger Ballast Boards (MPXL)
Trigger Ballast - Electronics used in all MPXL Lamps (100-230VAC) Part Number: F97 (100VAC) Part Number: F98 (115VAC) Part Number: F99 (230VAC) Trigger Ballast - Electronics used in all MPXL Lamps (12/24VDC) Part Number: F100 (12/24VDC) Note: Trigger Ballast Boards must be fitted by a suitably qualified electrician. Trigger Ballast Boards carry a 12 month warranty only if installed by Labino approved suppliers
Reflectors (MPXL)
Reflectors For use in the Labino MPXL range of UV Lights. Part Number: F401 (FLOOD) 45o angle Part Number: F351 (MID) 20o angle Part Number: F301 (SPOT) 3o angle
Filter Glass (MPXL)
Replacement Filter Glass (Front Glass) The Front filter glass can be replaced if damaged. For use with all Labino MPXL UV Lights. Part Number: F70
Mounting Brackets & Stands
Mounting Brackets For use with all Labino MPXL UV Lights and BB Series. Part Number: F800 (U-Shaped Mounting Yoke) Part Number: F801 (Mounting Brackets - set of two) Part Number: F802 (Mounting Bracket with loop - set of two) Stands For use with Labino MPXL, BB and MB Series Part Number: A530 (Labino Friction Arm) - A high quality, flexible and easy-to-use support system, enabling the operator to work with two free hands. Jointed arm with just one large locking knob. Either free stand on the 3 leg base or clamp to bench etc. via the second clamp. Length: 53 cm (21”). Weight: 1.07 kg (2.35lb) arm only, 2.55 kg (5.61 lb) complete. Part Number: A532 (UVG Variable Gooseneck Arm) - The UVG arm has a clamp at the lower part that mounts on a bench or a hard surface and a clamp at the top especially designed to fit the UVG series Torches. The snake shape body allows the user to form any angle required to keep the torch facing a specific position. Part Number: A533 (MB Variable Gooseneck Arm) - The MB arm has a clamp at the lower part that mounts on a bench or hard surface and a screw at the top specifically designed to fit the MB series lights. The heavy-duty snake shape body allows the user to form any angle required to keep the MB facing a specific position.
Mains Chargers & PSU’s (MPXL)
Mains Chargers For use with the TrAc Series of UV Lights. Part Number: B132 (TrAc Pack Standard ) Part Number: B161 (TrAc Light) Part Number: B136 (TrAc Light Pro) Power Supply Units (PSU’s) For use with the TrAc Pack Pro UV Lights. Part Number: B120 (230v PSU Unit - TrAc Pack Pro) Part Number: B122 (115v PSU Unit - TrAc Pack Pro)
Batteries (MPXL)
Replacement Batteries For use with the TrAc Series of portable MPXL UV Lights. Part Number: B111 (TrAc Pack Standard & TrAc Pack Pro) Part Number: B112 (TrAc Light) Part Number: B113 (TrAc Light Pro)
Handles, Straps & Misc. Spares
Miscellaneous spares For use with the Labino MPXL UV Lights. Part Number: F141 (Pistol Handle) Part Number: F142 (Top Handle) Part Number: F62 (Cable Bend Protection) Part Number: S201 (On/Off switch) Part Number: F60 (O-ring front) Part Number: F143 (Shoulder Strap to suit TrAc Pack Standard & TrAc Pack Pro) Part Number: F145 (Shoulder Strap to suit TrAc Light Pro) Part Number: F61 (Heat Protection pin - one supplied)
En-Liten White Light Add-on
En-Liten LED White Light Add-on For use with all Labino Standard MPXL UV Lights. Also suitable for use with Labino BB Series LED UV Lights. Part Number: L2001 (En-Liten LED White Light attachment)
UVG LED Torch Spares
UVG2 & UVG3 Spares For use with all Labino UVG UV LED Torches. Part Number: B201 (UK Battery Charger) Part Number: B115 (Battery) Part Number: B160 (Car Charger) Part Number: A532 (UVG Variable Gooseneck Arm) Part Number: F107 (UVG Rubber Bumper) Part Number: C3100 (Hard Carry Case) Part Number: A600 (Tripod Stand
VISION 365 LED Torch Spares
VISION 365 Spares For use with VISION 365 (UV365) UV LED Torches. Part Number: B201 (UK Battery Charger) Part Number: B115 (Battery) Part Number: B160 (Car Charger) Part Number: C3100 (Hard Carry Case) Part Number: A600 (Tripod Stand
UV Blocking Glasses & Face Shield For use with all UV Lights. Part Number: S505 XC (Regular fit glasses) Part Number: S400 (UV Blocking Visor Full face protection)
MB Series Spares
MB UV LED Light Spares For use with the MB UV LED Lights. Part Number: F111 (Rubber Bumper) Part Number: A504 (MB Belt Holster) Part Number: A533 (MB Variable Gooseneck Arm) Part Number: F105 (Thumb Screws) Part Number: A601 (Magnet for PSU Holder) Part Number: B115 (Spare Battery) Part Number: B201 (External Battery Charger Set - UK) Part Number: B321 (Internal Battery Charger Set - UK) Part Number: B325 (PSU for Mains Only Models - UK)
Note: Other spares are available please contact us with your needs. BROCHURES PRODUCTS
UV Spares & Accessories
REQUEST QUOTE Brochure Brochure BUYON-LINE CONTACT US SHOP
UV Accessories